0
Welcome Guest! Login
0 items Join Now

SOLVED Grid with 33.3% width

    • Beginner's Avatar
    • Beginner
    • Rocketeer
    • Posts: 81
    • Thanks: 0

    SOLVED Grid with 33.3% width

    Posted 6 years 6 months ago
    • Dear Team,

      I need to have a flexible grid system but can't find a solution for it.

      At the first, please see the attached image...

      I have created three colums within the layout and get three entries, each column have 33.3% width. Now I published a slider with 2/3 width on the 1st module position and a logo on the 3rd, but this not work as expected.

      Than I have set the fixed checkbox, the result is that the slider was published only on one position (1/3 size instead of 2/3), it also not works for me.

      My next test was to create a module position with 66.6% width, but this isn't possible and to use two module positions with 66% and 34% destroed the 3/3 grid which I should have.

      What can I do to get a flexible grid system?

      In the picture you can see only a few needed scenaries.

      It would be nice to know if this is possible or not.

      I use the g5_hydrogen 5.4.18 template on a local machine.


      Regards,
      Daniel
    • Last Edit: 6 years 6 months ago by Beginner.
    • MrT's Avatar
    • MrT
    • Preeminent Rocketeer
    • Posts: 101084
    • Thanks: 13481
    • Web Designer/Developer

    Re: SOLVED Grid with 33.3% width

    Posted 6 years 6 months ago
    • I just created those layouts ok? See screenshot. 66.6% isn't valid it needs to be 66.7% to add up to 100% for the line.

      Regards, Mark.
    • Please search forums before posting. Please make sure your post includes the version of the CMS you are using and a link to the problem. Annotations on screenshots can also be helpful to explain problems/goals. Please use the "secure" tab for confidential information.
    • Beginner's Avatar
    • Beginner
    • Rocketeer
    • Posts: 81
    • Thanks: 0

    Re: SOLVED Grid with 33.3% width

    Posted 6 years 6 months ago
    • Hi Mark,

      I tried it again and it works.

      But I saw my issue, I tried to set 66.6% instead of 66.7% and therefore it dosn't work. Maybe it was a little bit too late last night... :-)

      Thanks for your help!

      Regards,
      Daniel

Time to create page: 0.036 seconds